Vacuum source
Generate and regulate vacuum
Vacuum Generators & Ejectors
Compact ejectors, multi-stage generators, energy-saving units, blowers, and conveying designs.
Open this system group
All Your Base INC / Industrial vacuum automation
Vacuum automation, specified as a complete system.
AYBmart connects vacuum generation, the workpiece interface, tooling, compliance, sensing, and control in one technical product system.
Application-led selection
Published family dataDirect technical contact
Vacuum handling architecture
AYBmart engineering index
Component architecture
Every part has a job in the circuit.
Move through the system in engineering order, from vacuum creation to contact, mounting, control, and protection.
Workpiece interface
Seal against the real surface
Suction Cups
Flat, bellows, deep, and special-purpose cup geometries for different materials and surfaces.
Open this system group
End-of-arm tooling
Build the handling face
Gripsters & End-of-Arm Tooling
Area, matrix, flow, magnetic, and needle tooling for robot and gantry handling.
Open this system group
Mounting and compliance
Manage height and alignment
Level Compensators & Mounting
Level compensators, ball joints, flexible mounts, and adapters for controlled compliance.
Open this system group
Control and protection
Condition the complete circuit
System Components
Filters, valves, switches, gauges, silencers, fittings, and hose for circuit integrity.
Open this system group
Application brief
Start with the workpiece, not the part number.
A credible selection begins with the real load case and ends with a complete circuit that has been tested on the real part.
Open the engineering libraryDescribe the contact problem
Material, surface, porosity, temperature, orientation, and permitted contact.
Define force and cycle behavior
Mass, acceleration, safety margin, evacuation, hold, movement, and release.
Select the system together
Generation, interface, tooling, tubing, valves, filtration, sensing, and control.
Prove it on the real part
Pickup, leakage, transfer, release, recovery, wear, and fault response.
Product cross-section
Representative hardware from across the system.
Vacuum source
ABM/ABXMini Vacuum Generator
Review family
Workpiece interface
SFUniversal Flat Suction Cup
Review family
End-of-arm tooling
TXCStandard Vacuum Gripster
Review family
Mounting and compliance
PSPDDouble-Spring Heavy-Duty Level Compensator
Review family
Control and protection
ZFAUniversal Vacuum Filter
Review family
Engineering field notes
Practical guidance for the decisions behind the hardware.
Use the technical library to frame the load case, compare vacuum behavior, and review the circuit before hardware is ordered.
Browse technical resources
Selection methodHow to size suction cups
Translate load, orientation, acceleration, working vacuum, and safety margin into a defensible starting geometry.
Vacuum generationHow vacuum ejectors workRead vacuum level, evacuation flow, leakage behavior, and compressed-air demand as one performance picture.
System designBuild a complete vacuum circuitPlace generation, filtration, valves, sensing, tubing, and release components into a maintainable circuit.
Start an application review
Tell us what the system has to move.
Include the part, load, surface, cycle time, orientation, available pressure, and any environmental constraints.